How to thread a sewing machine without the hassle


Learning to thread a sewing machine may seem a bit tricky at first, but once you’ve mastered the basics you’ll be ready to start sewing in no time, whether you own any of the basics. best sewing machines on the market or a more basic model.

The best place to start is to consult your sewing machine’s instruction manual and see if it has any useful tips or tricks for threading the machine.

How to thread a sewing machine

Step 1

The first step in threading a sewing machine is to wind the bobbin. The bobbin thread should match the top thread you want to use, both in color and weight.

Remove the bobbin from the bobbin case. It will either be a front loading mechanism or most modern machines have spools to insert.

It is best to start with an empty bobbin to ensure that the thread winds evenly. Throw away any leftover yarn or buy extra spools to have a supply of yarn colors ready to go.

2nd step

Place your spool of thread on the spool holder, placing a plastic cover that came with your machine on top to hold the thread in place.

Pull the thread to the left of the sewing machine and guide it through the thread guides. If your machine has a bobbin winder tension disc, continue winding the thread around it.

Step 3

Take the empty bobbin and push the thread through a small hole on the top of about 3 cm. Hold the thread in place as you slide the bobbin onto the spool, which looks like a mini spool pin on the right front of the machine. Then slide the bobbin winder to the right until it clicks into place.

Step 4

Lightly press the foot control to slowly wind the thread onto the bobbin. Once you have even coverage of the thread, cut the end of the starter thread with a pair of scissors. Increase the pressure on the pedal and wind the bobbin until it is full.

Step 5

Cut the thread, slide the unwinder to the left and remove the bobbin from the spindle. Put the bobbin back in its casing, dropping it or loading it from the front into the slot and winding the thread through the casing – you will need to consult your manual for this step.

Replace the bobbin cover and you are now ready to learn how to thread the sewing machine to start sewing.

Remember, before winding your bobbin, it’s a good idea to check that our instructions match your manual. The general rules will still apply, but there may be a few steps specific to your model.

Step 6

Now that you’ve wound your bobbin, you can start threading the sewing machine, which is often easier than learning how to wind the bobbin. So if you’ve made it this far, the next part is a snap.

To begin with, make sure your needle is in the vertical position. To do this, turn the large dipper on the right side of the machine toward you until the needle is as far away from the stitch plate as possible.

Step 7

Place the thread on the spool at the top of the machine and hold it in place with the plastic disc that came with your sewing machine. Pull the thread to the right and through or around the thread guide. If you have just finished winding the bobbin, your thread will already be in the correct position.

Step 8

Pull the thread towards you and it should fit into the space at the front of your machine. Wrap the thread around the tension disc or groove at the bottom of the machine, and then guide the thread up to the take-up lever. It is the metal hook that appears when the needle is in the vertical position.

Step 9

Now bring the thread to the needle, guiding the thread through the needle guides that it passes – this is a good time to refer to your manual and check that you are threading the sewing machine correctly.

Then thread the needle back and forth. Often modern machines will include a needle threader to make this step easier.

Step 10

Holding the end of the thread in your left hand, turn the handwheel towards you so that the needle goes down and then up. As the needle goes up, pull the thread in your left hand and the bobbin thread will be pulled up through the needle plate.

Pull both ends of the thread back and out of the way of the presser foot. There should be no tension on the wires and they should move easily when pulled.

You are now ready to start sewing with our tutorial on how to use a sewing machine.

You’ll be a sewing machine whiz in no time at this rate!


Comments are closed.